Summary：
GPYL series disc filter is a kind of solid-liquid separation equipment，Filter by the motor through the speed reducer and gear transmission to drive, refers to the full pulp tank rotates at a certain speed, in the adsorption zone by means of vacuum pump to form pressure difference in filter media on both sides of the solid material adsorbed on the filtering medium (filter cloth), the cake is formed. Filter by the motor through the speed reducer and gear transmission to drive, refers to the full pulp tank rotates at a certain speed, in the adsorption zone by means of vacuum pump to form pressure difference in filter media on both sides of the solid material adsorbed on the filtering medium (filter cloth), the cake is formed. The cake into the dry zone, remove most of the water, and then into the waste area, the compressed air generated by the blower, blown most cake filtration on the disc, the rest by the scraper discharge, a complete cycle of the end.

Technical features:
1. No agitator, for scab material filtering (such as aluminum hydroxide), It can be realized without stirring.
2, the flow rate of filtrate is less, because of the small filter plate, large and medium axis structure, the filtrate reflux is less, and the filtrate is low.
3, the filtrate floats are low, the hollow shaft of the filter plate is sealed and sealed, and the leakage is less.
4, with overload protection, even if the filter plate is stuck in the use of the filter, it will not cause an accident.
5, using frequency control , can reverse, speed can be adjusted; bearing bush and vacuum sealing surface with electric pump automatic refueling, convenient and quick.
6. The central angle of the single sector plate is reduced and the diameter of the plate is increased greatly. The filtration and drying areas are enlarged, and the area of the transition zone is reduced.
7. The structure of the filter plate ensures the strength and increases the opening rate by a large margin to improve the filtration performance.
8, the size of the single block filter plate is reduced, the weight of the filter plate is lighten, and the replacement of the filter cloth is convenient.
9, the filter plate adopts the pressing device, which ensures that the joint of the filter plate and the hollow shaft is not leaking.
10, the filter plate is set up the guide wheel device, the filter plate guide device prevents the excessive deflection of the filter disc and prolongs the service life of the filter cloth.
11. The instantaneous blower system uses no contact switch to make its operation accurate and the life prolonging.
12. The dry oil centralized lubrication system is used to make the lubrication more reliable and the operation of the equipment is more stable.

Scope of use:
The vertical plate filtration is suitable for the dehydration of fine grain material under the filter 0.5mm, which is mainly used to filter the dehydration of aluminum hydroxide and other materials.